H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Pobierz pdf (Strona 93)

• A remote probe VLAN must be a static VLAN. To remove the VLAN configured as a remote probe

VLAN, you must first remove the remote probe VLAN with the undo mirroring-group remote-probe

vlan command.

• If the remote probe VLAN of a remote mirroring group is removed, the remote mirroring group will

become invalid.

• The link type of monitor ports configured for port mirroring must be access.

Configuration procedure

To configure local port mirroring with multiple monitor ports:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Create a remote source

mirroring group.

mirroring-group group-id

remote-source

By default, no mirroring group exists

on a device.

3. Configure source ports

for the remote source

mirroring group.

• (Method 1) In system view:

mirroring-group group-id

mirroring-port mirroring-port-list

{ both | inbound | outbound }

• (Method 2) In interface view:

a. interface interface-type

interface-number

b. [ mirroring-group group-id ]

mirroring-port { both |

inbound | outbound }

c. quit

Use either method.

By default, no source port is

configured for a mirroring group.

4. Configure the reflector

port for the remote

source mirroring group.

mirroring-group group-id reflector-port

reflector-port

By default, no reflector port is

configured for a mirroring group.

5. Create the remote

probe VLAN and enter

VLAN view.

vlan vlan-id

By default, no remote probe VLAN is

configured for a mirroring group.

6. Assign monitor ports to

the remote probe

VLAN.

port interface-list

By default, a newly-created VLAN

does not have any member port.

7. Return to system view.

quit N/A

8. Configure the remote

probe VLAN for the

remote source mirroring

group.

mirroring-group group-id

remote-probe vlan rprobe-vlan-id

By default, no remote probe VLAN is

configured for a mirroring group.

Configuring Layer 2 remote port mirroring

This section describes the Layer 2 remote port mirroring configuration procedures.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Strona 93

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery H3c-technologies H3C WX5500E Series Access Controllers