H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Pobierz pdf (Strona 53)

Ste

Command

Remarks

3. Specify a name for a channel

identified by its number.

info-center channel

channel-number name

channel-name

Optional.

See Table 2 for

default channel

names.

4. Configure an output channel

for the trap buffer and set the

buffer size.

info-center trapbuffer [ channel

{ channel-number |

channel-name } | size buffersize ]

Optional.

By default, system information is

output to the trap buffer through

channel 3 (known as trapbuffer)

and the default buffer size is 256.

5. Configure an output rule for

the trap buffer.

info-center source { module-name |

default } channel { channel-number

| channel-name } [trap { level

severity | state state } * ]

Optional.

See "Default output rules of system

informati

on."

6. Configure the timestamp

format.

info-center timestamp { debugging

| log | trap } { boot | date | none }

Optional.

The timestamp format for log, trap

and debugging information is date

by default.

Outputting system information to the log buffer

The log buffer receives the log information only, and discards the trap and debugging information.

To output system information to the log buffer:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enable the information center.

info-center enable

Optional.

Enabled by default.

3. Specify a name for a channel

identified by its number.

info-center channel

channel-number name

channel-name

Optional.

See Table 2 for

default channel

names.

4. Configure an output rule for

the log buffer.

info-center logbuffer [ channel

{ channel-number |

channel-name } | size buffersize ]

Optional.

By default, system information is

output to the log buffer through

channel 4 (known as logbuffer)

and the default buffer size is 512.

5. Configure an output rule for

the log buffer.

info-center source { module-name |

default } channel { channel-number

| channel-name } [ log { level

severity | state state } * ]

Optional.

See "Default output rules of system

informati

on."

6. Configure the timestamp

format.

info-center timestamp { debugging

| log | trap } { boot | date | none }

Optional.

The timestamp format for log, trap

and debugging information is date

by default.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Strona 53

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery H3c-technologies H3C WX5500E Series Access Controllers