H3c-technologies H3C WA3600 Series Access Points Instrukcja Użytkownika

H3C WA3600 Series Indoor Access PointsInstallation Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Document versio

5 Installing the AP CAUTION: The WA3600 series is usually installed on a high position, such as a wall or ceiling, so the maintenancepersonnel cann

6 • Record the MAC address and serial number of the AP (marked on the rear of the AP) for future use. Determining the installation position Determin

7 CAUTION: Connect the AP to the network by using an Ethernet cable, and then install the AP to the wall-mounting bracket when you mount the AP on a

8 Figure 6 Mounting keyholes (1) Hook (2) Clip (3) Tab (4) Mounting keyhole 4. Mount the AP on the hook on the wall-mounting bracket. See callou

9 Mounting the AP on a wall or ceiling (II) NOTE: • The wall or ceiling tiles must be less than 18 mm (0.71 in) thick, and the wall or the ceilin

10 Figure 9 Mount the AP on a wall (1) Nut (2) Hex-head bolt (3) Wall-mounting bracket (4) Hook CAUTION: Check that the AP is secured to the mou

11 Figure 10 T-rail holder (1) T-rail clip (2) M4 × 8 screw nut (3) Clip holder (4) T-rail holder (5) M3 × 6 screw nut (6) M4 × 8 screw (7) M3 × 6

12 9. Install the AP to the wall-mounting bracket. For more information, see “Mounting the AP on a wall (I).” Figure 12 Mount the AP to the T-rail

13 Figure 13 Drill a hole in the ceiling and route the cable (1) Ethernet cable (2) Ceiling (3) T-rail NOTE: To ensure neat cabling, follow Fig

14 Figure 14 Secure the AP (1) Security slot (2) Security lock (3) Security cable Connecting the power supply The WA3600 series can be powered by

Copyright © 2011-2012, Hangzhou H3C Technologies Co., Ltd. and its licensors All rights reserved No part of this manual may be reproduced or transmi

15 Figure 15 PoE connection (1) Ethernet port (2) Ethernet cable (3) PoE switch Local power supply NOTE: No power adapter and power cable are s

16 Check after power-on After powering on the AP, check the AP status LED. For more information about AP LEDs, see “Appendix LEDs and ports.” Connect

17 Logging in to the fat AP NOTE: The WA3600 series is usually installed on a high position. H3C recommends that you log in to the AP toconfigure

18 Figure 17 Connect the console cable 3. Power on the AP. The AP’s startup information will be displayed. Setting terminal parameters To set term

19 Figure 19 Set the serial port used by the HyperTerminal connection 4. Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to

20 The HyperTerminal window appears. Figure 21 HyperTerminal window Logging in through the console port Power on the AP, and you can see the follow

21 Appendix LEDs and ports LEDs Table 5 describes the LEDs provided by the WA3600 series. Table 5 LED description Mark Color Status Description Gree

22 Ports The WA3610i-GN and WA3620i-AGN provide the following external ports: • A console port • A 10/100/1000 Mbps copper Ethernet port • A power

23 Port Standards and protocols Description Console port RS/EIA-232 The console port is used for configuration and management (for debugging when th

24 Index A C D E I L P S U A Accessories provided with the AP,4 C Check before installation,5 Connecting the AP to the network,16 Connecting the po

Preface The H3C WA3600 Series Indoor Access Points Installation Guide describes the hardware specifications, preparations before installation, install

Obtaining documentation You can access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the links on t

i Contents Product overview ··························································································································

1 Product overview The H3C WA3600 Series Indoor Access Points (referred to as the WA3600 series hereinafter) includes the WA3610i-GN, WA3620i-AGN, an

2 Figure 2 Deployment of the AP on hotspots (fat AP) Table 1 Basic configuration Model Protocol Antenna Power consumption WA3610i-GN • IEEE802.1

3 Preparing for installation Safety recommendations WARNING! Only qualified personnel can install and remove a WA3600 series and its accessories. Y

4 Accessories provided with the AP The following accessories are provided with the AP: Wall-mounting bracket T-rail holder T-rail holder mountin