H3c-technologies H3C WA3600 Series Access Points Instrukcja Użytkownika Pobierz pdf (Strona 25)

The HyperTerminal window appears.

Figure 21 HyperTerminal window

Logging in through the console port

Power on the AP, and you can see the following information:

System is starting...

Booting Normal Extend BootWare.

…

System application is starting...

Startup configuration file does not exist.

User interface con0 is available.

Press ENTER to get started.

Logging in through Telnet or web

By default, the Telnet and web functions are enabled. You can use the following default settings to log in

to the web interface:

• Username—admin

• Password—h3capadmin

• Management IP address of VLAN-interface 1 of the AP—192.168.0.50, with the subnet mask

255.255.255.0.

If the default IP address is changed, contact the administrator to get the new IP address, or use the

display vlan 1 command to view the IP address after logging in to the AP from the console port.

NOTE:

For more information about Telnet or web login configuration, see

H3C WA Series Access Points

Configuration Guides

1 2 ... 20 21 22 23 24 25 26 27 28 29

Brak uwag

H3c-technologies H3C WA3600 Series Access Points Instrukcja Użytkownika Strona 25