H3c-technologies H3C WA3600 Series Access Points Instrukcja Użytkownika Pobierz pdf (Strona 21)

Check after power-on

After powering on the AP, check the AP status LED. For more information about AP LEDs, see “Appendix

LEDs and ports.”

Connecting the AP to the network

APs can access the Internet or metropolitan area network (MAN) through the Ethernet uplink interface. To

implement Internet or MAN access, connect the Ethernet port of the AP to an Ethernet port of an Ethernet

switch.

Checking the network connection for the fit AP

When the AP operates as a fit AP, all of its settings are configured on the AC. You can use the display

wlan ap all command to check the AP status on the AC. When the AP status is R/M, the AP has been

successfully connected to the AC (on a WA3628i-AGN for example).

<AC> display wlan ap all

Total Number of APs configured : 1

Total Number of configured APs connected : 1

Total Number of auto APs connected : 0

AP Profiles

State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad

C = Config, R = Run, KU = KeyUpdate, KC = KeyCfm

--------------------------------------------------------------------------------

AP Name State Model Serial-ID

--------------------------------------------------------------------------------

ap1 R/M WA3628i-AGN 210235A0T6B117000435

-------------------------------------------------------------------------------

Checking the network connection for the fat AP

When the AP operates as a fat AP, use the ping command to ping the uplink network. If the network can

be pinged successfully, the AP is successfully connected to the network.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Brak uwag

H3c-technologies H3C WA3600 Series Access Points Instrukcja Użytkownika Strona 21