H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Pobierz pdf (Strona 90)

Local port mirroring configuration task list

Local port mirroring takes effect only when the source ports and the monitor port are configured.

Complete these tasks to configure local port mirroring:

Task Remarks

Creating a local mirroring group Required.

Configuring source ports for a local mirroring group

Perform at least one configuration.

Configuring source CPUs for a local mirroring group

Configuring the monitor port for a local mirroring group Required.

Using the remote probe VLAN to enable local mirroring to support

multiple monitor ports

Optional.

Creating a local mirroring group

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Create a local mirroring

group.

mirroring-group group-id local

No local mirroring group

exists by default.

Configuring source ports for a local mirroring group

Either you can configure a list of source ports for a mirroring group in system view, or you can assign only

the current port to the mirroring group as a source port in interface view. To assign multiple ports to the

mirroring group as source ports in interface view, repeat the operation.

Configuration restrictions and guidelines

• A mirroring group can contain multiple source ports.

• On the WX5540E switching engine, one mirroring resource is used for mirroring unidirectional

traffic on a source port and two mirroring resources are used for mirroring bidirectional traffic on a

source port. A source port on the WX5540E switching engine is assigned a maximum of four

mirroring resources. Therefore, a port, when serving as a unidirectional source port, can be added

to up to four mirroring groups. When serving as a bidirectional port can be added to up to two

mirroring groups, and when serving as a bidirectional source port and two unidirectional ports can

be added to up to three mirroring groups.

Configuring source ports in system view

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Configure source ports for a

local mirroring group.

mirroring-group group-id

mirroring-port mirroring-port-list

{ both | inbound | outbound }

By default, no source port is

configured for a local mirroring

group.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Strona 90

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery H3c-technologies H3C WX5500E Series Access Controllers