H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Pobierz pdf (Strona 91)

Configuring a source port in interface view

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter interface view.

interface interface-type

interface-number

N/A

3. Configure the current port as

a source port for a local

mirroring group.

[ mirroring-group group-id ]

mirroring-port { both | inbound |

outbound }

By default, a port does not serve as

a source port for any local

mirroring group.

Configuring source CPUs for a local mirroring group

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Configure source

CPUs for a local

mirroring group.

mirroring-group group-id

mirroring-cpu slot slot-number-list

{ both | inbound | outbound }

By default, no source CPU is configured

for a local mirroring group.

Configuring the monitor port for a local mirroring group

CAUTION:

Do not enable the spanning tree feature on the monitor port.

Either you can configure the monitor port for a mirroring group in system view, or you can assign the

current port to a mirroring group as the monitor port in interface view. The two modes lead to the same

result.

Configuration restrictions and guidelines

• A mirroring group contains only one monitor port.

• H3C recommends that you use a monitor port for port mirroring only. This is to make sure that the

data monitoring device receives and analyzes only the mirrored traffic rather than a mix of mirrored

traffic and normally forwarded traffic.

• You cannot configure the monitor port in a mirroring group as a port in an RRPP ring.

Configuring the monitor port in system view

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Configure the monitor port for

a local mirroring group.

mirroring-group group-id

monitor-port monitor-port-id

By default, no monitor port is

configured for a local mirroring

group.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C WX5500E Series Access Controllers Instrukcja Użytkownika Strona 91

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery H3c-technologies H3C WX5500E Series Access Controllers