H3c-technologies H3C SecPath L1000-A Load Balancer Instrukcja Użytkownika Pobierz pdf (Strona 70)

Appendix C Numbering interfaces

Numbering interfaces

Interfaces on the L1000-A are numbered in the form of interface-type X/Y, where,

• interface-type represents the type of the interface such as GigabitEthernet.

• X represents the number of the slot where the interface module resides.

• Y represents the sequence number of the interface on the interface module.

Note the following:

• Interfaces on the same interface module have the same slot number X.

• For each type of interfaces, the sequence number Y starts from 0 and increases according to the

sequence on the interface module (from left to right).

Examples

1. The fixed fiber/copper ports on the front panel of the F1000-A-EI are numbered as follows:

{ GigabitEthernet 0/0

{ GigabitEthernet 0/1

{ GigabitEthernet 0/2

{ GigabitEthernet 0/3

{ GigabitEthernet 0/4

{ GigabitEthernet 0/5

{ GigabitEthernet 0/6

{ GigabitEthernet 0/7

{ GigabitEthernet 0/8

{ GigabitEthernet 0/9

{ GigabitEthernet 0/10

{ GigabitEthernet 0/11

2. If both slot 1 and slot 2 of the L1000-A are installed with an NSQ1GP4U0, the GigabitEthernet

interfaces are numbered as follows:

{ Slot 1—GigabitEthernet 1/0, GigabitEthernet 1/1, GigabitEthernet 1/2, GigabitEthernet

1/3.

{ Slot 2—GigabitEthernet 2/0, GigabitEthernet 2/1, GigabitEthernet 2/2, GigabitEthernet

2/3.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 83 84

Brak uwag

H3c-technologies H3C SecPath L1000-A Load Balancer Instrukcja Użytkownika Strona 70