H3c-technologies H3C LSWM1WCM10 Access Controller Module Instrukcja Użytkownika Pobierz pdf (Strona 37)

30

..........................................................................

...........................Done!

4. Select 0 to return to the BootWare main menu. Select 1 in the BootWare main menu to reboot the

system.

NOTE:

• If the downloaded file has the same file name with an existin

file in the CF card, the system prompts The

file is exist, will you recover it? [Y/N]. If you choose Y, the existing file will be replaced.

• Make sure that sufficient space is available in the stora

e device. In case of insufficient space, the system

will give a prompt message.

• The new application file directly replaces the existing file of the same type. In this example, the

downloaded file main.bin replaces the existing application file of the type M and becomes the only

main application file.

• For more information about the application file types, see “

Appendix Introduction to software

maintenance.”

Upgrading an application program through FTP in

BootWare menu

1. Set up a software upgrade environment

Figure 17 Set up an FTP upgrade environment

Connect the management Ethernet port on the access controller module to the PC with an Ethernet cable.

Run the FTP server program on the PC, and specify the path of the program to be downloaded, and

configure the FTP username as guest and password as 1234 56 .

2. Modify the Ethernet port parameters.

Select 3 in the BootWare main menu to enter the Ethernet port submenu. Then, select 5 to enter the

Ethernet port configuration submenu:

============================<ETHERNET PARAMETER SET>======================

|Note: '.' = Clear field. |

| '-' = Go to previous field. |

| Ctrl+D = Quit. |

==========================================================================

Protocol (FTP or TFTP) : ftp

H3c-technologies H3C LSWM1WCM10 Access Controller Module Instrukcja Użytkownika Strona 37