H3c-technologies H3C LSWM1WCM10 Access Controller Module Instrukcja Użytkownika Pobierz pdf (Strona 35)

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

==========================================================================

Enter your choice(0-9): 0

Select 0 in the BootWare main menu to reboot the access controller module.

NOTE:

The name of the BootWare upgrade file depends on the device model.

Upgrading an application program through TFTP in

BootWare menu

1. Set up a software upgrade environment.

Figure 16 Set up a software upgrade environment

Connect the management Ethernet port to a PC with a network cable. Run TFTP server on the PC, and

specify the path of the application file to be downloaded.

IMPORTANT:

The TFTP server software is not provided with the access controller module and you need to purchase and

install it yourself.

2. Modify the Ethernet port parameters.

Select 3 in the BootWare main menu to enter the Ethernet port submenu. Then, select 5 to enter the

Ethernet port configuration submenu:

============================<ETHERNET PARAMETER SET>======================

|Note: '.' = Clear field. |

| '-' = Go to previous field. |

| Ctrl+D = Quit. |

==========================================================================

Protocol (FTP or TFTP) :tftp

Load File Name :main.bin

Target File Name :main.bin

Server IP Address :192.168.0.1

Local IP Address :192.168.0.2

Gateway IP Address :192.168.0.1

FTP User Name :

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 49 50

Brak uwag

H3c-technologies H3C LSWM1WCM10 Access Controller Module Instrukcja Użytkownika Strona 35