H3c-technologies H3C SecPath F1000-E Instrukcja Użytkownika Pobierz pdf (Strona 31)

Figure 24 Configuring connection limit for the trusted zone

Perform the following operations on the page:

• Select zone Trust.

• Select the Discard packets when the specified attack is detected option.

• Select the Enable connection limit per source IP option and set the threshold to 100.

• Click Apply.

# Configure connection limits for the DMZ as shown in Figure 25.

Figure 25 Configuring connection limit for the DMZ

Perform the following operations on the page:

• Select zone DMZ.

• Select the Discard packets when the specified attack is detected option.

• Select the Enable connection limit per dest IP option and set the threshold to 10000.

• Click Apply.

# Configure SYN flood detection for the DMZ.

From the navigation tree, select Intrusion Detection > Traffic Abnormality > SYN Flood. The SYN flood

detection confirmation page appears.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 98 99

Brak uwag

H3c-technologies H3C SecPath F1000-E Instrukcja Użytkownika Strona 31