H3c-technologies H3C SecPath F100-C-EI Instrukcja Użytkownika Pobierz pdf (Strona 52)

Installation Manual

H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-2

Boot the firewall, and press Ctrl+B when the system displays

“Press Ctrl-B to enter Boot Menu”. The system then displays:

Please input Boot ROM password :

Caution:

z To enter the Boot Menu, press Ctrl+B within three seconds after

the information “Press Ctrl-B to enter Boot Menu...” appears.

Otherwise, the system starts to decompress the program.

z To enter the Boot menu after the firewall starts the program

decompression process, reboot the firewall.

Type the correct password and press Enter. (If no Boot ROM

password is configured, just press Enter. If you fail to enter the correct

password three times consecutively, the system will be halted. You

need to restart the firewall in this case.) The system displays the

following Boot menu.

5.1.1 Boot Menu of the Firewall

Boot Menu:

1: Download application program with XMODEM

2: Download application program with NET

3: Display file in flash

4: Delete file from flash

5: Start up and ignore configuration

6: Enter debugging environment

7: Boot ROM Operation Menu

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 78 79

Brak uwag

H3c-technologies H3C SecPath F100-C-EI Instrukcja Użytkownika Strona 52