H3c-technologies H3C SecBlade NetStream Cards Instrukcja Użytkownika Pobierz pdf (Strona 43)

To do… Use the command…

Remarks

Configure the authentication mode

as local password authentication

authentication-mode password

Required

By default, you can log in to the

SecBlade card through the console

port without authentication and

have user privilege level 3 after

Set the local password

set authentication password

{ cipher | simple } password

Required

By default, no local password is

set.

Configure common settings for

console login

—

Optional

See “Configuring common settings

for console login (optional).”

When you log in to the SecBlade card through the console port after configuration, you are prompted to

enter a login password. A prompt such as <H3C> appears after you input the password and press Enter,

as shown in Figure 10.

Figure 10 Configuration page

Configuring scheme authentication for console login

Configuration prerequisites

You have logged in to the SecBlade card.

By default, you can log in to the SecBlade card through the console port without authentication and have

user privilege level 3 after login. For information about logging in to the SecBlade card with the default

configuration, see “Configuration requirements.”

Configuration procedure

Follow these steps to configure scheme authentication for console login:

To do… Use the command…

Remarks

Enter system view system-view —

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 348 349

Brak uwag

H3c-technologies H3C SecBlade NetStream Cards Instrukcja Użytkownika Strona 43