H3c-technologies H3C SecPath F5020 Instrukcja Użytkownika Pobierz pdf (Strona 81)

[Sysname-context-3-cnt2] allocate interface gigabitethernet 1/0/2 gigabitethernet

1/0/12

[Sysname-context-3-cnt2] quit

4. Configure context cnt3:

# Create context cnt3 and configure a description for it.

[Sysname] context cnt3

[Sysname-context-4-cnt3] description context-3

# Assign context cnt3 to security engine group test. (The ID of the group is 2.)

[Sysname-context-4-cnt3] location blade-controller-team 2

# Set the CPU weight to 2 for the context.

[Sysname-context-4-cnt3] limit-resource cpu weight 2

# Start the context.

[Sysname-context-4-cnt3] context start

It will take some time to start the context...

Context started successfully.

# Assign interfaces GigabitEthernet 1/0/3 and GigabitEthernet 1/0/13 to the context.

[Sysname-context-4-cnt3] allocate interface gigabitethernet 1/0/3 gigabitethernet

1/0/13

[Sysname-context-4-cnt3] quit

Verifying the configuration

# Verify that you can use the switchto context command to log in to the contexts and manage the contexts.

(Details not shown.)

1 2 ... 76 77 78 79 80 81 82

Brak uwag

H3c-technologies H3C SecPath F5020 Instrukcja Użytkownika Strona 81