H3c-technologies H3C SecPath F5020 Instrukcja Użytkownika Pobierz pdf (Strona 20)

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Configure a PPP address pool.

ip pool pool-name start-ip-address

[ end-ip-address ] [ group group

name ]

By default, no PPP address pool

is configured.

3. (Optional.) Configure a

gateway address for the PPP

address pool.

ip pool pool-name gateway

ip-address [ vpn-instance

vpn-instance-name ]

By default, the PPP address pool

is not configured with a gateway

address.

4. (Optional.) Configure a PPP

address pool route.

ppp ip-pool route ip-address

{ mask-length | mask }

[ vpn-instance vpn-instance-name ]

[ vsrp-instance

vsrp-instance-name ]

By default, no PPP address pool

route exists.

The destination network of the

PPP address pool route must

include the PPP address pool.

5. Enter ISP domain view.

domain isp-name N/A

6. Associate the ISP domain with

the configured PPP address pool

for address assignment.

authorization-attribute ip-pool

pool-name

By default, no PPP address pool

is associated.

For more information about this

command, see Security

Command Reference.

7. Return to system view.

quit N/A

8. Enter interface view.

interface interface-type

interface-number

N/A

9. Configure an IP address for the

interface.

ip address ip-address

By default, no IP address is

configured on an interface.

This command is optional when

the PPP address pool is

configured with a gateway

address.

To configure the device as the server (Method 3: Associate a DHCP address pool with an ISP domain):

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Configure DHCP.

• If the server acts as a DHCP

server, configure the DHCP

server and a DHCP address

pool on the server.

• If the server acts as a DHCP

relay agent, configure the

DHCP relay agent on the

server, and configure a DHCP

address pool on the remote

DHCP server. In addition, you

must enable the DHCP relay

agent to record relay entries,

and configure a DHCP relay

address pool.

For information about

configuring DHCP, see Layer 3

IP Services Configuration Guide.

3. Enter ISP domain view.

domain isp-name N/A

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C SecPath F5020 Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bezpieczeństwo H3c-technologies H3C SecPath F5020