H3c-technologies H3C WA2600 Series WLAN Access Points Instrukcja Użytkownika Pobierz pdf (Strona 20)

Figure 12 Alternative method for installing an omnidirectional antenna

NOTE:

In Figure 12, the antenna po

le is not fixed on the cement pier. Instead, the antenna pole is fixed by

welding two angle steel bars between the antenna pole and the lightning rod pole.

Connecting cables

WARNING!

Before connecting any cable, make sure that all power lines are disconnected and locked out and that no

hazardous voltage is present on the neutral (N) line.

CAUTION:

Make sure that the outer sheath of cables is intact and does not absorb moisture to protect the AP from

water leak.

External cables may include antenna cable, Ethernet cable, fiber cable, grounding cable, and power

cord.

Connecting the antenna cables

The antenna cables connect the antenna ports (2.4 GHz and 5 GHz) to the outdoor antennas.

To connect the antenna cables:

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Brak uwag

H3c-technologies H3C WA2600 Series WLAN Access Points Instrukcja Użytkownika Strona 20