H3c-technologies H3C WA2600 Series WLAN Access Points Instrukcja Użytkownika Pobierz pdf (Strona 44)

6-3

For example, if you specify the maximum MCS index as 5 for mandatory rates, rates corresponding to

MCS indexes 0 through 5 are configured as 802.11n mandatory rates.

Mandatory rates must be supported by the AP and the clients that want to associate with the AP.

Supported rates allow some clients that support both mandatory and supported rates to choose higher

rates when communicating with the AP.

Follow these steps to configure 802.11n rates:

To do… Use the command… Remarks

Enter system view

system-view

—

Enter RRM view

wlan rrm

—

Specify the maximum MCS index

for 802.11n mandatory rates

dot11n mandatory

maximum-mcs

index

Optional

No maximum MCS index is specified for

802.11n mandatory rates by default.

Specify the maximum MCS index

for 802.11n supported rates

dot11n support

maximum-mcs

index

Optional

By default, the maximum MCS index for

802.11n supported rates is 76.

If you configure the client dot11n-only command for a radio, you must configure the maximum MCS

index for 802.11n mandatory rates.

Configuring Power Constraint

Prerequisites

The radio is enabled and at least one service template is configured.

Configuring Power Constraint

Follow these steps to configure power constraint:

To do… Use the command… Remarks

Enter system view

system-view

—

Enter WLAN RRM view

wlan rrm

—

Enable spectrum management for

802.11a radios

spectrum-management enable

Required

By default, spectrum management

is disabled.

Configure power constraint for all

11a radios

power-constraint

Optional

The default value for power

constraint is 0 dBm.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 83 84

Komentarze do niniejszej Instrukcji

Brak uwag

H3c-technologies H3C WA2600 Series WLAN Access Points Instrukcja Użytkownika Strona 44

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery H3c-technologies H3C WA2600 Series WLAN Access Points