H3c-technologies H3C SR6600-X Instrukcja Użytkownika Pobierz pdf (Strona 44)

MIM-1CE3(RT-MIM-1CE3-V2-H3)

The MIM-1CE3 is a 1-port channelized E3 interface module. It has the following features:

• In E3 mode, it transceives and processes high-speed data streams over the E3 channel, and

provides access to E3 data streams.

• In CE3 mode, it provides the low-speed access service at N × 64 kbps, where N is smaller than or

equal to 128.

NOTE:

• E3 represents the tertiary group rate of the E series in the TDM system, which is 34.368 Mbps.

• An E3 channel can be channelized into 16 E1 channels throu

h the demultiplex processes of E23 and

E12, with each E1 channel supporting both the E1 and CE1 operating modes. E23 indicates either

E2-to-E3 multiplex or E3-to-E2 demultiplex, and E12 indicates E1-to-E2 multiplex or E2-to-E1

demultiplex. E23 and E12 discussed here represent the demultiplex process.

Front panel

Figure 27 Front panel

(1) Carrier si

nal LED (LINK/ACT) (2) TX interface

(3) RX interface (4) Captive screw

(5) Loopback/

larm LED (LP/AL)

LEDs

Table 39 LED description

LED Status Descri

tion

LINK/ACT

Off No carrier signals are received.

On Carrier signals are received.

Flashing Data is being transmitted or received.

LP/AL

Off No loopback or alarms occur.

On The interface is in loopback state.

Flashing

A minimum of one alarm of the type of AIS, LFA, or RAI has

occurred.

• LFA—Loss of frame alignment.

• AIS—Alarm indication signal.

• RAI—Remote alarm indication.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 84 85

Brak uwag

H3c-technologies H3C SR6600-X Instrukcja Użytkownika Strona 44